Hi Rusty, I have update and I will try to explain it with my bad English
Today I was disconnect LED around gear gator and connect it to the big connector where it was connected from factory. But I've changed position of pins just like on this picture of tupcal:
Before it was connected on pins 6 and 7.
On pin No. 7 I have 1.3V all the time, just like in connector for door ambient light (just checked today).
OK I think that pin No. 7 on big connector under gear gator and connector on the door has some coherence because both of them have 1.3V all the time.
But LED is now working connected to pins 9 and 10 and its look like factory. When I remove key from ignition it powers off etc.
This is really confusing. I hope that you understand this what I wrote
Do you have any ideas where is problem with door ambient light?
Now I think that LED around gear gator isn't fault for that because now its working like factory (just like on tupcals picture).
G5 via Tapatalk
Today I was disconnect LED around gear gator and connect it to the big connector where it was connected from factory. But I've changed position of pins just like on this picture of tupcal:
Before it was connected on pins 6 and 7.
On pin No. 7 I have 1.3V all the time, just like in connector for door ambient light (just checked today).
OK I think that pin No. 7 on big connector under gear gator and connector on the door has some coherence because both of them have 1.3V all the time.
But LED is now working connected to pins 9 and 10 and its look like factory. When I remove key from ignition it powers off etc.
This is really confusing. I hope that you understand this what I wrote
Do you have any ideas where is problem with door ambient light?
Now I think that LED around gear gator isn't fault for that because now its working like factory (just like on tupcals picture).
G5 via Tapatalk