How to ambient door lights

[mislav_os]

Hi, I've got an Astra J ST 2013, Active+.

Please help me, I have nightmares with this.

I have a lot of problems with ambient lightning.
First I was installing ambient around gear gator. There was LED around him but it wasn't working. I have a manal handbrake and there was big connector on the LED.
I connected them using tutorial from this forum and thanks for that.

Then I decided to put ambient light on doors. My friend did that before me and he said that there were factory connectors behind door trim. He had same equipment (Active) as me but he has EPB (and factoy working ambient light around gear gator).

He just connected it and it worked immediately.

When I took off door trim I saw that I have factory connector for the ambient light just as my friend.



Now when I connected everything it doesn't work. I mean that the light is working all the time with 10% of its power and it doesn't react on light switch (when I turn lights on everything powers on except of that door ambient light).

Same thing was with ambient around gear gator before I connected them on power switch(yellow wire) via tutorial. LED was working all the time a little bit.

Problem is that I have all 4 electric windows and I don't have yellow wire on drivers side to connect that LED using this tutorial.

Do you have any ideas what can I do to make my door ambient light to light as it should be?

I hope you understood what the problem is and I hope you can help me.
Sorry for my bad English.

G5 via Tapatalk