22:nd-Feb-2019, 11:36:15
Hello! Sorry for my bad English. I tried to do something less invasive than what tucpal proposed. I mean trying not to make any hole on the dust cap, but intercepting the drl + and - cables on the cable that goes to the headlamp. So I found the corresponding cables, but when I plug the resistance among the drl positive and negative, the 7443 leds in position mode turn off. If I unplug the resistance, the led in position mode come back to work. Do you know why I am wrong? Thank you.
P.S.: I corrected the pin order on the lamp.
P.S.: I corrected the pin order on the lamp.