welcome 
8 amp is what they use on the loads resistors
so that is what i used
i just spliced and the soldered and shrink wrapped the wires
to the DRL bulb holder
then you can have more wire
and place the load resistors were you like

8 amp is what they use on the loads resistors
so that is what i used
i just spliced and the soldered and shrink wrapped the wires
to the DRL bulb holder
then you can have more wire
and place the load resistors were you like

![[-] [-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png)

![[Image: DSC03659_zpssmtodvyc.jpg]](http://i179.photobucket.com/albums/w301/tucpal/DSC03659_zpssmtodvyc.jpg)