Welcome back to the VXOC FORUM.
Sorry for our lack of support over the last year but MYBB is back and so are we.
Let's get the forum buzzing again... (March 25, 2022)x
could anyone tell me what size discs i need for the front of a 2014 gtc 1.4 t,i ordered a pair from a reputable supplier just to find they where too small ,, advice please
I installed the navi 950 in the Buick encore, reprogrammed the EEPROM with the Buick encore VIN and everything went great (head unit works fine). After leaving the car locked for a while and turning on the head unit again, there is no sound at all even turning signals or open door sounds dissapear.
im going to be retrofitting front fogs to my SE bypassing the BCM and wiring them in myself but i have the switch unit out of an sri that has the front and rear buttons as im trying to keep it as standard as poss i would like to know if anyone has a pin out of the switch unit or knows which pin in the load signal pin to go to the relay i have included a quick diagram on how i am going to run the fogs so one you know what im talking about and two if anyone else wants to try it so you dont need to get a VCI code as i believe with the switch unit and op-com you can turn on the IPC light so that will come on like normal when you turn the front fogs on and off
I wonder if anyone else has wanted a visible exhaust tip for their 1.6cdti 5 door? On the 2.0 cdti you can see the exhaust under the rear bumpers valance, does anyone know if its easy to swap over from the 2 litre car? Or could i just buy the bumper insert and a backbox after that? (Im led to believe theres little point in getting anything performance related for a diesel exhaust?)
I have recently bought my Astra J After having an Astra K As my company car (Couldnt quite afford the K :()
Its a 65 plate Astra Tourer 1.6 cdti
It came with a cd400 and an after market bluetooth thing which is okay but doesnt give me any options on the radio itself. So I dont know whos calling with looking at my phone or dont know what music is playing so its kinda pointless.
I've done alot of searching on google and on here about retofitting and upgrading to different radios. Ive done this before with my 58 plate astra with tech-2 but now it looks a bit different.
What I really want to know are my options
I want bluetooth dab and satnav does the J have an apple car play radio like the K? That's what I have in my company car and if I could have anything like that I'll be happy preferably oem and not after market.
Also maybe something that can do parking sensors or reverse camera as this car is massive and doesn't have anything to help me whilst reversing.
I've got a recurring issue and I've already changed a number of things however the issue persists.
When I start the car, randomly, the car sometimes will start to crank, stop and then continue and eventually start. When this happens however it enters some sort of limp mode and advises 'Service Vehicle Soon'. So to confirm, the car struggled to start but started first time, out of the drive, no power. Struggles to rev past 2k and over 15mph is a push but not EML light on.
The quickest way to resolve this I have found is to clear the fault codes and the car starts fine next time around.
Plugging my OBD and Delphi in I get the P0193 error it states Fuel Rail Pressure Sensor Circuit, high voltage. I've already changed the fuel rail sensor for a brand new part and the issue still persists.
What on earth could be causing this?
I've already done the following:
- Changes Glow Plug Cyl 3, my car has the stop start so really expensive to change all of them.
- Changed Fuel Rail High Pressure Sensor
- Removed, cleaned and tested EGR Valve. Cleaned first time around when this happened, we had it off and tested the mechanism off the battery, the EGR opened and closed without issue.
Ive refurbed alloys in the past using a dremel, varying git sandpaper, filler, primer, paint and clear coats. Generally it has turned out well.
I plan to try to do the same to my GTC limited edition alloys soon. Originally I thought they where diamond cut due to the coloring and texture, but at closer inspection and a bit of sanding I believe them to be painted.
![[Image: gTRDJYp.png]](https://i.imgur.com/gTRDJYp.png)
