finally got around to fitting the resistors a couple of weeks ago. No more bulb error messages.
Photos of where I mounted them. the white stuff you see is thermal paste. The same stuff they use on the processor chip in computers when mounting them to heat sinks to help dissipate the heat more evenly. It was difficult to drill the holes for the self tapping screws, and unfortunately I couldn’t mount the offside resistor in the same orientation as the nearside one. The main thing is the heat from the resistors has somewhere to go, and they’re not in the way.
Well I’ve tried for the last 10 mins to try and upload some photos. I give up.
Please delete this post as it’s pointless without photos.
Photos of where I mounted them. the white stuff you see is thermal paste. The same stuff they use on the processor chip in computers when mounting them to heat sinks to help dissipate the heat more evenly. It was difficult to drill the holes for the self tapping screws, and unfortunately I couldn’t mount the offside resistor in the same orientation as the nearside one. The main thing is the heat from the resistors has somewhere to go, and they’re not in the way.
Well I’ve tried for the last 10 mins to try and upload some photos. I give up.
Please delete this post as it’s pointless without photos.