Welcome back to the VXOC FORUM.
Sorry for our lack of support over the last year but MYBB is back and so are we.
Let's get the forum buzzing again... (March 25, 2022)x
i did it on my GTC that had a Navi900 i just jumped the connections on the plug that plugs into the BT module on the pin 9 to 18 pin 8 to 17 and pin 7 to 16. To change the Vin on the head unit i used a post on Cruzetalk.com pretty easy. no GM reprogramming required. https://www.cruzetalk.com/forum/137-gen1...m-vin.html
(15:th-Jun-2019, 22:42:32)sw_reijnders Wrote: is it okay to hack into this topic??
if i want to replace a cd500 with a navi 950
what parts need to be changed?
Of course it is.
Main Navi box
Display screen
The control panel will still work but your find the Radio/band becomes the home button the CD/AUX becomes the source button.
(15:th-Jun-2019, 22:42:32)sw_reijnders Wrote: is it okay to hack into this topic??
if i want to replace a cd500 with a navi 950
what parts need to be changed?
Of course it is.
Main Navi box
Display screen
The control panel will still work but your find the Radio/band becomes the home button the CD/AUX becomes the source button.
so all the wires and cable looms are the same?
that's good news
(15:th-Jun-2019, 22:42:32)sw_reijnders Wrote: is it okay to hack into this topic??
if i want to replace a cd500 with a navi 950
what parts need to be changed?
Of course it is.
Main Navi box
Display screen
The control panel will still work but your find the Radio/band becomes the home button the CD/AUX becomes the source button.
so all the wires and cable looms are the same?
that's good news
current uhp module will also work?
Yes they are. No the UPH module will need to be removed as it's not used a new microphone wire would need to be ran up-to the roof, also if you have DAB you may need to add 2 data wires from DAB module to main radio plug.
16:th-Jun-2019, 20:05:46 (This post was last modified: 16:th-Jun-2019, 20:09:46 by Lansa.)
As mentioned before on Facebook, the older generation astra radio's had a seperate bluetooth module "UPH". It sits underneath the radio box.
CD300, CD400, CD500, DVD 800, Navi 600, Navi 900.
These UPH bluetooth modules can only do phone calls.
(CD600, Navi 650 usually come with a UPH module, but there are versions of these radios which can bluetooth stream music)
The Navi 950 has it's own modern bluetooth module build into the radio itself. Which supports AD2P aswell as some more modern handsfree api's.
---------
If you wish to retrofit this radio, you'll have to disable your existing bluetooth module.
And then you have to rewire the existing microphone in your headliner to the back of the navi 950. (see A11x4)
You could try and depin the mic wires that go into the UPH module to the 950... (see K82 below)
But it's easier to just run new wires. (Rusty sells these replacement looms).
The hard part is scoring the unit itself, scrapyards know they're worth more.
Hi Guys, appreciate this thread spans a couple of years but having now purchased a NAVI 950 to replace my CD500 (NAV & DAB) assuming it was cheaper and easier (as in direct manufacturer replacement) than an aftermarket Android Auto with supporting looms / fascia etc. I may have made some unfounded assumptions :(
@Lansa, do you have a link to the microphone loom that rusty sells please?
Also, if the UHP module is no longer required, does this imply that DAB is included in the 950 and thus normal DAB rather than DAB+?
(27:th-Nov-2020, 14:07:37)welshp Wrote: Hi Guys, appreciate this thread spans a couple of years but having now purchased a NAVI 950 to replace my CD500 (NAV & DAB) assuming it was cheaper and easier (as in direct manufacturer replacement) than an aftermarket Android Auto with supporting looms / fascia etc. I may have made some unfounded assumptions :(
@Lansa, do you have a link to the microphone loom that rusty sells please?
Also, if the UHP module is no longer required, does this imply that DAB is included in the 950 and thus normal DAB rather than DAB+?
Cheers,
Paul.
The navi 950 has it's own bluetooth built in, so the UHP module is no longer needed.
For DAB+ you will need an extra module and will be DAB+ (u4d module)
@rusty2009 will be able to sell you the loom if you ask him