15:th-Feb-2015, 13:56:45
as you have the LED in the Door handle you just need to plug the loom rusty makes into that connector on the LED
and the fit the door card back on and then pull the wires up through the hole for the window switch and then splice into the wires
for power and ground you have the much easier option.
you need the second option but you dont need to fit the LED to the door card.
and the fit the door card back on and then pull the wires up through the hole for the window switch and then splice into the wires
for power and ground you have the much easier option.
you need the second option but you dont need to fit the LED to the door card.