8:th-Sep-2015, 22:11:27
(This post was last modified: 8:th-Sep-2015, 22:13:01 by justmat82.
Edit Reason: Missed a bit
)
Hi,
I stumbled across this thread while I was googling Ambient lighting to add into the car.
I've followed the instructions above and its spot on for the passenger side, but my drivers side has different coloured wires to what you mention, I'm at a bit of a loose end on which I need to use, I've attached a couple of images below that show the options I have.
I've got a 2013 Cascada.
As you can see my drivers connection doesn't have yellow where it shows on the grid, its red and brown stripe.
I currently have half a car with the door lighting and half without. Any help would be appreciated.
the top of the connector has the four wires, not three
[img][/img]
[img][/img]
Theres loads of stuff on this site I'll be doing to mine as interior is very similar to the Astra J.
I stumbled across this thread while I was googling Ambient lighting to add into the car.
I've followed the instructions above and its spot on for the passenger side, but my drivers side has different coloured wires to what you mention, I'm at a bit of a loose end on which I need to use, I've attached a couple of images below that show the options I have.
I've got a 2013 Cascada.
As you can see my drivers connection doesn't have yellow where it shows on the grid, its red and brown stripe.
I currently have half a car with the door lighting and half without. Any help would be appreciated.
the top of the connector has the four wires, not three
[img][/img]
[img][/img]
Theres loads of stuff on this site I'll be doing to mine as interior is very similar to the Astra J.