24:th-Aug-2016, 19:41:45
I had a go at doing the throttle body today, did everything step by step but after removing the three torx bolts I couldn't get the intake pipe to budge from the throttle body. I didn't want to put too much pressure on it in case I knackered something, is the intake pipe usually difficult to pull out of the throttle body?
My missus had been out in the car a short while before so the engine wasn't totally cooled down so maybe that caused it to be tight? Any advice appreciated.
My missus had been out in the car a short while before so the engine wasn't totally cooled down so maybe that caused it to be tight? Any advice appreciated.