![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
4:th-Nov-2017, 19:50:38
It's funny you should mention that @Rusty2009 - I thought I had seen something a couple of weeks ago when I first read this post. I'm using Tapatalk and saw nothing after the question about using plcc-2 instead of plcc4, but now, if I scroll **UP** in Tapatalk, I can see your reply & pictures. Had nothing, post end earlier.
If I jump to the top of the post, then scroll down, missing again.
I was experiencing the same thing last night on the how to remove steering wheel how-to :s
Anyway, yes, plcc4 pads, plcc2 smd factory fitted.
I used the plcc-4 i had for the needles anyway, not noticing any difference there either.
||Sent based on the twin scientific principles of star maths and wishy thinking.||
If I jump to the top of the post, then scroll down, missing again.
I was experiencing the same thing last night on the how to remove steering wheel how-to :s
Anyway, yes, plcc4 pads, plcc2 smd factory fitted.
I used the plcc-4 i had for the needles anyway, not noticing any difference there either.
||Sent based on the twin scientific principles of star maths and wishy thinking.||