How-to led reverse light

[tucpal]

THIS IS A HOW TO AND REVIEW OF THE SMD LED REVERSE LIGHT BULB
FOR THE ASTRA J 5 DOOR.

So here are the SMD LED Bulb
that is a Direct Replacement for the Standard Bulb
it looks very well made and it is also Really Bright
and also Error Free.







STEP ONE.

Remove the Plastic Cover from the Tailgate
to gain Access to one Screw and Remove it
then Remove the Two Plastic Caps
and Remove Two more screws
be Careful not to Brake the Rubber Grommets on the Screws.  









STEP TWO.

Remove the Light Unit from the car
and undo the Connector from the unit.



Now that you have the Unit out
turn the Unit over and Push the White Tab
and lift the White Holder out
Remove the Old Bulb
and Fit the New SMD LED into Position
then Refit the Unit and the Job is Done.  







Here are the Results Day and Night.











This is a Super Bright SMD LED bulb
and the Standard Bulb looks real naff in Comparison with this
the Bulb is also Error Free
so no Problems at all with the Canbus
i can Highly Recommend this LED it looks fantastic

They can be Picked up on ebay, H21W, LED.
here is an Example Link but shop about

http://www.ebay.co.uk/itm/141191988703?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

AS WITH ALL ELECTRICAL HOW TOO,S.
you do this at your own risk if you follow the how to correctly
there should be no problems thank you.