how to upgrade interior lights to SMD LED

[tucpal]

This is a very Simply and Cheep Upgrade
How to Upgrade interior Lights to SMD LED BULBS.



STEP ONE..........
 
Start with the sun Visors all you need to do is to Remove
the two Plastic pieces to get Access to the Bulbs
Gently Pull from one Side
and swap the Bulbs for the New SMD LED.





Now your Girl Friend will be very Happy
as she now has Super Bright white SMD LED'S to do her Makeup.

STEP TWO............

Remove the Trim from the Console in the Headliner.



Pull off the Trim around the Light Unit.



Then you need to Pull off
the Plastic light Cover.



You can Add your New SMD LED Bulbs
i went for one Red in the Center
and Two white each side
but you can do what you what.



RESULTS..........

And here is the Results.





STEP THREE........

Is to Remove the Plastic Cover
from the Rear Lights in the Headliner
again this will just Pull off.





RESULTS...........

And the results..



The SMD LED,S are much Brighter
than the Standard Bulbs
and they look much Better
make sure you Get Canbus Error Free Bulbs
there are Plenty of ebay Listings for these Bulbs now
and Typically you can get them all for under £15.

You are Looking for W5W/501.SMD, LED, Bulbs x 5
and 6615F are the Standard sun Visor Bulbs
you will need x4 SMD LED,S
You can also swap the Glove Box Light to SMD LED
just Remove the Glove Box.
How to Here..

http://www.vxoc.org.uk/forum/Thread-Howt...bin-filter
that just need 1 x w5w/501 SMD LED.

ALSO CHECK AT BOTTOM OF THE PAGE FOR A BETTER LED BULB OPTION...POST 21..

AS WITH ALL ELECTRICAL HOW TOO,S.
you do this at your own risk if you follow the how to correctly
there should be no problems thank you.