This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
to box removing replace how glovebox bulb glove without

HOW TO: Replace Glove Box Bulb Without Removing Glovebox
#1
[Image: 9nd4_zpsea5fce57.jpg]

So i thought id show you guys how to change the glove box bulb for a nice w5w 501 smd bulb, i used one with 12 smds.

Items needed:
Blunt knife of plastic lever
New bulb

So this firstly, how the light switch works, when the pin is extended the light comes on, when the pin is pushed in, the light goes off.

The first step is to use a blunt table knife or other tool to lift down the light from the rear as shown below, when the back pops down you need to push the light backwards towards the front of the car and down at the same time.

[Image: 20140314_175635_1_zpsuru6exhc.jpg]

This is how it will show when it drops down

[Image: 20140314_175740_1_zpsieapoqo9.jpg]

After it has dropped down its just a case of unplugging the old yellow bulb and putting the new one in, when putting the light fitment back in, put the pin through the hole first then clip the light housing back in. The last picture shows how it looks after.

[Image: 20140314_180642_1_zpsh5nenoe4.jpg]
[Image: CameronUKAnimated.gif]
Reply
#2
Nice how-to mate thanks.
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#3
good job. :cool
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#4
Does anyone have a link to a bulb that can be used for this? Not sure which to get as they have different shapes on ebay
[Image: vCa3MP6.jpg]

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#5
There the same as the interior lights W5W T10 501
i recommend these.

[Image: ledtail001_zps34297b57.jpg]

http://www.ebay.co.uk/itm/301445826489?_...EBIDX%3AIT

You could put the other one in the boot light.
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#6
Cheers mate! I'd already bought thee packs of those which left me with one spare after I've done the roof lights but just got another pack so I can do the boot light too Smile
[Image: vCa3MP6.jpg]

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#7
they are the best i have found out there Smile
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#8
I tried this earlier but broke the clip putting the unit back in, now it just dangles in the glove box :(
Reply
#9
(14:th-Jul-2017, 12:53:54)Steveb19111978 Wrote: I tried this earlier but broke the clip putting the unit back in, now it just dangles in the glove box :(


I did that too. Easier just to drop the box out for the additional time it takes


Sent from my iPhone using Tapatalk
[Image: 417101.png]
Reply
#10
(14:th-Jul-2017, 19:08:07)bhalay207 Wrote:
(14:th-Jul-2017, 12:53:54)Steveb19111978 Wrote: I tried this earlier but broke the clip putting the unit back in, now it just dangles in the glove box :(


I did that too. Easier just to drop the box out for the additional time it takes


Sent from my iPhone using Tapatalk

Did you manage to get a replacement? I looked on eBay and found nowt.
Reply
#11
(15:th-Jul-2017, 00:11:29)Steveb19111978 Wrote:
(14:th-Jul-2017, 19:08:07)bhalay207 Wrote:
(14:th-Jul-2017, 12:53:54)Steveb19111978 Wrote: I tried this earlier but broke the clip putting the unit back in, now it just dangles in the glove box :(


I did that too. Easier just to drop the box out for the additional time it takes


Sent from my iPhone using Tapatalk

Did you manage to get a replacement? I looked on eBay and found nowt.

Got a replacement from the dealer for just £3.34. Was shocked at just how cheap it was, so was the woman behind the counter (she had to check twice) Thud
Reply
#12
(15:th-Jul-2017, 00:11:29)Steveb19111978 Wrote:
(14:th-Jul-2017, 19:08:07)bhalay207 Wrote:
(14:th-Jul-2017, 12:53:54)Steveb19111978 Wrote: I tried this earlier but broke the clip putting the unit back in, now it just dangles in the glove box :(


I did that too. Easier just to drop the box out for the additional time it takes


Sent from my iPhone using Tapatalk

Did you manage to get a replacement? I looked on eBay and found nowt.


Yeah, a couple quid from a main dealer


Sent from my iPhone using Tapatalk
[Image: 417101.png]
Reply
#13
(15:th-Jul-2017, 20:15:47)bhalay207 Wrote:
(15:th-Jul-2017, 00:11:29)Steveb19111978 Wrote:
(14:th-Jul-2017, 19:08:07)bhalay207 Wrote:
(14:th-Jul-2017, 12:53:54)Steveb19111978 Wrote: I tried this earlier but broke the clip putting the unit back in, now it just dangles in the glove box :(


I did that too. Easier just to drop the box out for the additional time it takes


Sent from my iPhone using Tapatalk

Did you manage to get a replacement? I looked on eBay and found nowt.


Yeah, a couple quid from a main dealer


Sent from my iPhone using Tapatalk

Thanks mate all sorted (see above lol) [Image: thumbsup.png]
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Switch to mobile version