How To: Fit aftermarket Reverse Sensors

[djmaxi]

Hey, Thanks for your replies Sheppy1 and Stigeye,



This is what i was meaning!! - the sensors are in the centre of the little 'lip' bit above the number plate and below the contour line, which i can meaure and work out... its the distance between the sensors i need. See im about to tackle the project for my bro-in-law and he is a bit fussy with things ... and a bit wary bout me taking the bumper off!! lol.

Obviously Sheppy you have drilled the sensors in the exact locations marked on the 'underside' of the bumper, so if i duplicate the measurements on to his bumper they 'should' be in the same place - give or take a mil or 2!!

once i have them measuements, il mask off the bumper and mark it all up n then drill!

Thanks again for all the help - i appreciate it.

Maxi