30:th-Apr-2017, 10:19:17
(This post was last modified: 30:th-Apr-2017, 10:33:10 by scotchmist67.)
Hi Burnsy
I connected the amplifier wire from the antenna to the blue ant wire on the back of the unit, it was giving out 11.5v and still no stations
I connected the amplifier wire to the 12v no stations
When I disconnected the antenna from the original loom and touched the multimeter on the centre pin the station came on and it shows 11.5v through the antenna.
Does the 12v need to go to the antenna or does it need to go back to the original block.
I took photos but they are not showing properly.
Thanks
I connected the amplifier wire from the antenna to the blue ant wire on the back of the unit, it was giving out 11.5v and still no stations
I connected the amplifier wire to the 12v no stations
When I disconnected the antenna from the original loom and touched the multimeter on the centre pin the station came on and it shows 11.5v through the antenna.
Does the 12v need to go to the antenna or does it need to go back to the original block.
I took photos but they are not showing properly.
Thanks
(30:th-Apr-2017, 10:19:17)scotchmist67 Wrote: Hi Burnsy
I connected the amplifier wire from the antenna to the blue ant wire on the back of the unit, it was giving out 11.5v and still no stations
http://i1356.photobucket.com/albums/q731...sezxck.jpg
I connected the amplifier wire to the 12v no stations
When I disconnected the antenna from the original loom and touched the multimeter on the centre pin the station came on and it shows 11.5v through the antenna.
Does the 12v need to go to the antenna or does it need to go back to the original block.
I took photos but they are not showing properly.
Thanks