How to hardwire 2 x USB ports into the glove box for dashcam/phone

[bhalay207]

Thought I'd add another option for running cabling for the dashcam or usb.

I removed the panel running down the A pillar. It's abit of a sod to remove, so pull inwards (towards the driver side) and it'll then stop. What you have to do is squeeze both sides of the metal retaining clip as it has a secondary 'locking pin' for want of a better phrase. I'm assuming it's to stop the panel flying off of the airbag operates.




Run the cable down through the dash and towards the fuse box. Once there, make the necessary connections and tidy your wiring up with cable ties






I'll let the pictures tell the story



Sent from my LG G4 using Tapatalk