This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
to box ports usb hardwire the dashcam x into 2 for how glove phone

How to hardwire 2 x USB ports into the glove box for dashcam/phone
#12
Further update (unable to edit first post)

Purchasing of that adapter didn't help until I looked into it further.

I bought a 5M lead originally and that apparently is too long to charge the phone even with the adapter. I then took the plunge again and purchased this 3M Charge only lead and then installed.

This has solved the issue and my phone now fully charges. I also moved the adapter I bought originally across to the dashcam as I had noticed the battery on that had also started to go down and now it is fully charging.

Basically these car adapters only charge in USB mode unless you buy a cable that shorts the data pins together.

Anyway hope it helps someone in the future.
Reply


Messages In This Thread
RE: How to hardwire 2 x USB ports into the glove box for dashcam/phone - by DC_ELiTE - 14:th-May-2015, 12:58:28

Forum Jump:


Users browsing this thread: 1 Guest(s)

Switch to mobile version