This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
home module j key signal coming astra diagram

Astra J Coming Home Module / Key Signal Diagram
#1
Hey there guys!

I wanted to retrofit a Coming Home Module for my Astra J (A16XER).
The aftermarket Module needs a „door open“ signal to trigger the relay inside of it. I looked up in Autodata and searched the Internet but I cant find any useful information unfortunately. All I know is, the Body Control Module (BCM) should process the Signals but there are many cables to measure them all for my needed voltage signal.
Does somebody know or has a Wiring diagram/Pin assingment picture or something like that?
In the best case it should have a (short pulse) 12v Signal and no Canbus Data signal.

Thank you guys in advance!

Best regards from Austria,
Eric Smile
Reply
#2
See the attached more to follow.


Attached Files
.pdf   K9 Body Control Module X1.pdf (Size: 35.21 KB / Downloads: 198)
.pdf   K9 Body Control Module X2.pdf (Size: 26.74 KB / Downloads: 115)
.pdf   K9 Body Control Module X3.pdf (Size: 26.95 KB / Downloads: 107)
.pdf   K9 Body Control Module X4.pdf (Size: 34.93 KB / Downloads: 95)
.pdf   K9 Body Control Module X5.pdf (Size: 32.35 KB / Downloads: 109)
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#3
Last 2.


Attached Files
.pdf   K9 Body Control Module X6.pdf (Size: 26.46 KB / Downloads: 96)
.pdf   K9 Body Control Module X7.pdf (Size: 26.37 KB / Downloads: 89)
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#4
Ahh Rusty you‘re the best I knew I can count on you!! Smile Smile
Reply
#5
Hey there Rusty again, today I had a look at your pdf files and I thought it would be K6/Pin 21. But this Pin isnt even in the named plug. I measured the whole plug for the signal and came to a result it would be K6/Pin 4, I provisonally tried the module with Pin 4 and it worked I guess but after connecting and triying it out, the remote unlock/lock doesnt work anymore if the module is connected to this pin. Only after disconnecting the module the unlock/lock action worked again. It seems like, if you put any load (a relay) to the related pin, it doesnt work.

Maybe did I miss any pins relating my unlock signal? :( Smile
Reply
#6
Have you tried K6 pin1 or 2 Or K2 pin15
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#7
Tried them all too yesterday, unfortunately nothing usefull :/

Isn‘t behind the Speedometer dash, the key transmitter module itself?
Reply
#8
Yes it is.
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#9
To activate coming home mode you need:
1 remove the ignition key
2 open door
3 blink high beam ,
i check on my astra and it work
Reply
#10
(15:th-Jan-2019, 17:24:27)BOLT Wrote: To activate coming home mode you need:
1 remove the ignition key
2 open door
3 blink high beam ,
i check on my astra and it work

Could be wrong, but I think the OP wants something different to this.

Pretty sure what you're suggesting is standard fitment on most Vauxhalls now, so the OP would already be able to do this.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  TPMS on Astra J GTC milozic 0 2,095 14:th-May-2023, 18:58:09
Last Post: milozic
  insignia cluster into astra? Tylerrattv 48 49,359 30:th-Jul-2021, 18:27:37
Last Post: theendfear
  Rear camera fit on Opel astra sports tourer info ;) Alienbv 24 21,569 26:th-Dec-2019, 13:00:29
Last Post: niteram
  dab and fm signal up and down tzr608 31 17,961 15:th-Oct-2019, 19:58:04
Last Post: MikeyP247
  astra k cluster on astra j Maniacu 2 7,509 6:th-Jun-2019, 14:37:10
Last Post: Maniacu
  Astra J Instrument Cluster 32pin wiring diagram Milo629 0 6,166 22:nd-Jan-2019, 14:55:13
Last Post: Milo629
  Options to replace Navi 400 in 62 plate Astra Atarius 7 7,555 12:th-Sep-2018, 07:04:30
Last Post: Rusty2009
  Navi 900 to I-link/MyLink 950 Wiring diagram Tylerrattv 7 8,248 8:th-Sep-2017, 15:50:06
Last Post: Jpbroad1970

Who read this thread?
2 User(s) read this thread:
MrDjArMz (18:th-Oct-2024, 23:12:55), Steve12 (24:th-Jul-2024, 21:04:38)

Forum Jump:


Users browsing this thread: 1 Guest(s)

Switch to mobile version