Opel OPC Seat Wiring Diagrams

[Blue Dog]

Quick introduction. 
Location: Sydney, Australia.
Reason for joining your forum.
Attempting to obtain an electrical schematic of the wiring to a 2013 Opel OPC, specifically the two front Sports Seats.
I'm in the process of transplanting a pair of front seats from a wrecked 2013 Opel OPC into a 2013 Ford Falcon FG Turbo Ute.
The Opel seats are equipped with adjustable side bolsters, airbags & possibly lumbar adjustment in the back of the seats.
Both OPC seats are intact & I also have the body side connectors to each seat, with about 6 to 8 inches of loom attached.
Using the OPC body side wiring & connectors I should be able to make a couple of adapter harnesses between the Falcon wiring & the Opel seats.
I'd prefer not to set off the airbags by connecting them incorrectly, hence the request.
If a member could point me in the right direction as to where to obtain the above information concerning the schematics, that'd be great.

[Rusty2009]

The wiring will be the same as per normal heated seats with lumber.

I think the wiring info is on the forum somewhere.