+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Welcome & Site news (https://vxoc.org.uk/forum/forumdisplay.php?fid=3)
+--- Forum: Introduction Area (https://vxoc.org.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Opel OPC Seat Wiring Diagrams (/showthread.php?tid=9929)
Opel OPC Seat Wiring Diagrams - Blue Dog - 20:th-Mar-2024
Quick introduction.
Location: Sydney, Australia.
Reason for joining your forum.
Attempting to obtain an electrical schematic of the wiring to a 2013 Opel OPC, specifically the two front Sports Seats.
I'm in the process of transplanting a pair of front seats from a wrecked 2013 Opel OPC into a 2013 Ford Falcon FG Turbo Ute.
The Opel seats are equipped with adjustable side bolsters, airbags & possibly lumbar adjustment in the back of the seats.
Both OPC seats are intact & I also have the body side connectors to each seat, with about 6 to 8 inches of loom attached.
Using the OPC body side wiring & connectors I should be able to make a couple of adapter harnesses between the Falcon wiring & the Opel seats.
I'd prefer not to set off the airbags by connecting them incorrectly, hence the request.
If a member could point me in the right direction as to where to obtain the above information concerning the schematics, that'd be great.
RE: Opel OPC Seat Wiring Diagrams - Rusty2009 - 27:th-Mar-2024
The wiring will be the same as per normal heated seats with lumber.
I think the wiring info is on the forum somewhere.