![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
19:th-Dec-2024, 20:16:39
(This post was last modified: 19:th-Dec-2024, 20:21:04 by emilalexandrubarb.)
Hi,
And thank you for approving my post, also thank you for the information shared.
Regarding the account and motivation, it is only logic one comes when in need.
I will try my best to help others in matters I have already gone through and share what knowledge I have regarding my car.
I will try to remain as active as I can in this forum!
If i manage to make this working I will do my best to try to post a how to tutorial on how to retrofit a heated steering wheel on a car that doesn't have one.
Thank you again.
And thank you for approving my post, also thank you for the information shared.
Regarding the account and motivation, it is only logic one comes when in need.
I will try my best to help others in matters I have already gone through and share what knowledge I have regarding my car.
I will try to remain as active as I can in this forum!
If i manage to make this working I will do my best to try to post a how to tutorial on how to retrofit a heated steering wheel on a car that doesn't have one.
Thank you again.
(19:th-Dec-2024, 19:34:00)Rusty2009 Wrote: Well it is shame you've only made an account and posted to gain info.
It would be far better to at least contribute rather than just taking info this is why info isn't really sheared any more.
& I think it's a very rude and selfish attitude to have, you are happy to leech info from people who put the time & money into finding information and carry out these jobs without giving anything back.
The BCM does not require programming.
From A26 hater panel to Airbag X85x1
0.35 Brown/White
0.35 Yellow/Grey
From X53 rear fuse board to X85x3
0.75 Purple/Brown
A26 pin 4 should be brown/white This runs to back of the squib x1 pin 9
A26 pin 5 should be yellow/grey This runs to back of the squib x1 pin 10