31:st-Jan-2020, 11:30:04
Hi Rusty,
Thanks for your reply, not sure why i thought it needed coding In the BCM, Anyway,
Did you use the factory trailer module when you fitted your towbar? Or just used aftermarket relays? I wired the towbar thats on the car now so all be able to make the 13PIN wiring from the module to the socket. Do you know if theres any additional wires in the rear fuse board that i will need to check for if im going to fit the trailer module and make my own wiring harness? Is it as simple as connecting the module to the rear loom + fitting it and connecting the wiring harness from the module to the 13PIN Socket + Fitting. Of course the PDC module will need programming to.
If so, have you got any wiring diagrams so i can make my own 13PIN wiring harness from the module or just for the towbar body loom ?
Any help will be much appriciated, Ethan
Thanks for your reply, not sure why i thought it needed coding In the BCM, Anyway,
Did you use the factory trailer module when you fitted your towbar? Or just used aftermarket relays? I wired the towbar thats on the car now so all be able to make the 13PIN wiring from the module to the socket. Do you know if theres any additional wires in the rear fuse board that i will need to check for if im going to fit the trailer module and make my own wiring harness? Is it as simple as connecting the module to the rear loom + fitting it and connecting the wiring harness from the module to the 13PIN Socket + Fitting. Of course the PDC module will need programming to.
If so, have you got any wiring diagrams so i can make my own 13PIN wiring harness from the module or just for the towbar body loom ?
Any help will be much appriciated, Ethan