26:th-Aug-2018, 21:13:45
(26:th-Aug-2018, 16:35:17)Rusty2009 Wrote: First thing pull the rubber bungs out the bottom of the door this will allow the water to drain properly, check all doors.
2nd if your getting power to rear windows then I would rule out the BCM, but to answer your other question on that not (I can clone and reprogram BCM's on the bench you do need to match part numbers tho).
Is the motor making any noise at all or effort to move? Motors can be sourced pretty cheaply on ebay.
Is the green fog light symbol on the dash turning on when you push the button?
Post your reg up and John or myself can get build spec for you.
Thanks for the reply Rusty,yes i removed the bungs and now the waters drained out..shame really as i was going to put some goldfish in there...lol
I am getting no noise from the motor at all,i listened for a while but nothing.
The green fog light symbol does not light up on the dash and never has since i got the car,the rear one lights up ok but ziltch for the front,did manage to
get front bumper off and checked the wiring,,all was good so not that!!...
Anyway heres my reg Rusty: SH11 PGZ
Looks like i have bought a white elephant here to be honest,my own fault though!!!
And great news you can clone and reprogram the BCM`s.. Also sent you Vehicle DTC information from
11/2017 which was in the wallet with the car just to give you some idea of whats going on with it.
Any feedback on it would be appreciated...
Cheers Rusty..