Navi radio and larger instrument display changing

[gazz292]

It works

The connectors i got fit the IPC end, but not the stalk end... so for now i've just pushed the wires in the relevent holes in the plug and cable tied them to the loom, havent done anything with the coolant and washer fluid sensors yet, as i ran out of connectors (i dont have my crimping tool with me that does these tiny connectors, so bodged them with wire nippers,

I defo want to make the loom better with the correct connectors in the plugs, also, the cable i got was thicker than needed (i thought it was thinner) i guess maplins wasnt selling it in mm... numbers/maths isnt my strong point, and run the wires into the engine bay for the 2 sensors/switches i will add at a later date.

But i get the feeling i'll be doing a lot of wiring when i get to adding more items to this car, as i suspect there is a poverty spec loom with just the minimum wires needed and not one extra... noticed the REC in this car looks empty, just a single large red with green stripe wire to a stud at the top, and nothing else in it.