![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
1:st-Feb-2018, 21:41:38
Decided to nip out and swap the IPC over, it works..... ![[Image: WP_20180201_18_48_04_Pro.jpg~original]](https://i295.photobucket.com/albums/mm152/gazz292/WP_20180201_18_48_04_Pro.jpg~original)
but as expected, it wont show the mileage... or count any trip miles untill it's coded to the car....
![[Image: WP_20180201_18_48_13_Pro.jpg~original]](https://i295.photobucket.com/albums/mm152/gazz292/WP_20180201_18_48_13_Pro.jpg~original)
This is all i get when driving, speedo tracks properly... tho it's out more than my original... i.e. when doing 30 by sat nav, my original ipc showed 32, this one shows 35 and so on.
Obviousely it's thrown up a few fault codes.. i get:
B3902 - Incorrect Immobilizer Identifier Received
(00) - Present
B3567 - Info Display Select Switch Circuit - Open
(04) - Present
U0020 - Low Speed CAN Bus
(00) - Present
Stored in the IPC page in vaux-com, and :
B3926 - Incorrect Instrument Cluster Environment Identifier Received - Malfunction
(00) - Present
In the BCM, and of course it's showing the last car's vin number in the ipc page.... obviousely the B3567 is due to me not having the correct indicator stalk... that's coming tomorrow.
And i guess the last car had a few faults, as it's showing :
![[Image: edb8fd4b-9583-48d0-94cc-2e7479506f56.jpg~original]](https://i295.photobucket.com/albums/mm152/gazz292/edb8fd4b-9583-48d0-94cc-2e7479506f56.jpg~original)
As well as service park assist (that'll be it not detecting a park assist module in my car) and one other, it's got the engine trouble light on all the time and the air bag fault light.
Then i get the expected 'washer fluid and coolant low... i want to add those sensors, not sure if they will be plug and play on the meriva tho.
BUT, this ipc has a few illumination led's that have bad connections, and i don't get the handbrake on warning lamp.. even tho it lights up in the power on test and vaux-com's all lights test.... this ipc also has no comfort window close trouble light.. but i guess that would show on the graphical display?? and no eco shift up light.. but i can live without that... gotta check yet if it's got a DPF regen light too, so i may well get another IPC that's more suited to my car.
but as expected, it wont show the mileage... or count any trip miles untill it's coded to the car....
This is all i get when driving, speedo tracks properly... tho it's out more than my original... i.e. when doing 30 by sat nav, my original ipc showed 32, this one shows 35 and so on.
Obviousely it's thrown up a few fault codes.. i get:
B3902 - Incorrect Immobilizer Identifier Received
(00) - Present
B3567 - Info Display Select Switch Circuit - Open
(04) - Present
U0020 - Low Speed CAN Bus
(00) - Present
Stored in the IPC page in vaux-com, and :
B3926 - Incorrect Instrument Cluster Environment Identifier Received - Malfunction
(00) - Present
In the BCM, and of course it's showing the last car's vin number in the ipc page.... obviousely the B3567 is due to me not having the correct indicator stalk... that's coming tomorrow.
And i guess the last car had a few faults, as it's showing :
As well as service park assist (that'll be it not detecting a park assist module in my car) and one other, it's got the engine trouble light on all the time and the air bag fault light.
Then i get the expected 'washer fluid and coolant low... i want to add those sensors, not sure if they will be plug and play on the meriva tho.
BUT, this ipc has a few illumination led's that have bad connections, and i don't get the handbrake on warning lamp.. even tho it lights up in the power on test and vaux-com's all lights test.... this ipc also has no comfort window close trouble light.. but i guess that would show on the graphical display?? and no eco shift up light.. but i can live without that... gotta check yet if it's got a DPF regen light too, so i may well get another IPC that's more suited to my car.