![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
30:th-Jan-2018, 18:27:00
Well, i've decided to give things a go with the instruments, got an indicator stalk with the bord computer buttons on it coming in the post, and an instrument cluster from an insignia... was the cheapest one on ebay with the full size lcd info display in it, rev counter should be fine... goes to 6k like mine does, just the red line is 500rpm later than mine, just the speedo i worry about, being a 160/170mph one, it'll either read right as the logic in the ipc will take the pulses and move the stepper motor the correct amount, or it will read wrong... where i can put my ipc's speedo face in it.
I am of course hoping it will work just by plugging it in, i know the mileage won't show till it's married to my car (tho op-com has an option to alter the vin number in the ipc i believe, maybe that will help??)
Problem is, i am in Chester for the time being, and could do with finding someone near me who can set it all up to my car... as a drive down to bournmouth is a bit too far for me atm (a good 250 miles) i'd do that to get a nav950 unit coded into my car, and was going to wait till i'd sourced one and then get an ipc and have it all done at once.
I am of course hoping it will work just by plugging it in, i know the mileage won't show till it's married to my car (tho op-com has an option to alter the vin number in the ipc i believe, maybe that will help??)
Problem is, i am in Chester for the time being, and could do with finding someone near me who can set it all up to my car... as a drive down to bournmouth is a bit too far for me atm (a good 250 miles) i'd do that to get a nav950 unit coded into my car, and was going to wait till i'd sourced one and then get an ipc and have it all done at once.