![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
3:rd-Feb-2017, 12:57:23
I would have the car plugged onto GDS2 and check for any faults.
If none SPS the BCM & run through set-up and configure where it will relearn the pedal positions.
In my car I can change gear and accelerate wile CC is active and then it will take back over again it's not a fault its the way its designed, but IIRC it depends on engine and spec.
If none SPS the BCM & run through set-up and configure where it will relearn the pedal positions.
In my car I can change gear and accelerate wile CC is active and then it will take back over again it's not a fault its the way its designed, but IIRC it depends on engine and spec.
![[Image: Rusty-2_zpsuzrvgsp6.GIF]](https://www.vxoc.org.uk/Images/rusty/post%20images/Rusty-2_zpsuzrvgsp6.GIF)
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.