1:st-Feb-2015, 21:39:16
tucpal Wrote:most likely a bad connection
as they did work when you first plugged the wires into the connector
take the scotch locks back off
and check they have not cut the wires half
i dont use them personally
then try them again in the front of the connector
and check that it works
if so try and splice then together this time
Okay I'll do that then when I get chance after work during the week, if I still have problems come Saturday then I'll ask the garage to look at it who are doing my heated lumbar seats. Appreciate all your help and can see why you don't use those connecters! They take up far too much space! I had a hard time connecting the lights connecter back into it's socket because they were taking up loads of space and I think I could have knocked one of the splices loose when doing this.
And yeah I have turned the ignition on when testing them..really annoyed me that I spent so long doing it today and it still doesn't work :(