This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
to light boot how extra

How-to Extra boot light
#1
[Image: vx.o.c.jpeg]

How-to Extra Boot light.

Ok so first of all you need to feel along the top of the side trim, you will fell there is plastic behind it but as you move along you will feel there is a bit you can push in.

[Image: 1.JPG]

Once you found that area you can start to cut (DO NOT CUT IT ALL WAY) do a small bit to begin with and then slowly make the hole bigger as you go just use try the lamp as you go.

[Image: 2.JPG]

Then make a loom up and feed it through the hole down and down into the hidey hole.





Next remove the rear boot trim, To do this pull the rubber off and then pull the bottom of the trim in towards the front of the car, then using a trim tool lever the top off.

Then feed the loom behind the side trim and work your way along (Sorry not many pics here as some bits you can't get pics of).





Again at the other end feed it up behind the side trim and then feed it to the light (If open the hidey hole and feel the factory loom that will help you with routing this one.)



When wiring up connect you positive to the green and Negative to the Black, then solder and heat-shrink or solder and wrap in Elec tape.



Pop your lights back in and hey pesto extra boot light is installed.





Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#2
Nice tutorial mate! gonna try and tackle this tomorrow I think if the weather is still nice! With the first bit though when you say to feel at the top of the trim and push something in, what are you referring too and why does this need to be done?

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#3
well done and well worth doing

here is my extra boot light

Reply
#4
Can't wait to get mine in! Gonna use some of these extra bright bulbs I have too ha

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#5
Where the light is pop it unplug and run your hand along the length you will notice there is a cutout in the plastic behind the trim for the light, then it should make sense.

My very first picture was taken as if you were laying down look up.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#6
Hmmmm struggling to understand where that is or why I'd need to do it but wills see tomorrow when I tackle it thanks dude

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#7
definitely going to try this, thanks for tutorial mate

Reply
#8
Thanks for this tutorial again @rusty2009 just fitted the extra boot light as per your instructions and it works a charm photos are rubbish because it's very sunny (for a change) but here they are:







Any idea where this foam bit is supposed to go under the boot latch though? Looks a bit out of place now...or does it not matter?


Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#9
Cool did it make sense what I was saying now you've done it?
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#10
cool
Reply
#11
Ha yeah it did, there's one part where there isn't plastic blocking it isn't there...anywhere else and there wouldn't have been room behind the trim for the light and wiring to go would there

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#12
Anyone got any idea where I can get the bulb holder itself?


Sent from my iPhone using Tapatalk
Reply
#13
Lookers will be your best bet it wont be that much
Reply
#14
Got a link? It's showing me a dealership search engine through Google


Sent from my iPhone using Tapatalk
Reply
#15
lookers the dealership
Reply
#16
Oh, I'll have to pop into my local dealership and request it then. I'm also after the LEDs for the doors


Sent from my iPhone using Tapatalk
Reply
#17
Think the part numbers are in the how to for door lights somewhere
Reply
#18
Yeah I've got them, cheers though


Sent from my iPhone using Tapatalk
Reply
#19
Is 21a wire good to use?


Sent from my iPhone using Tapatalk
Reply
#20
Yeah be fine, the stuff I have is just the bog standard speaker wire from maplins

Sent from my A0001 using Tapatalk

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#21
So I've bought a rear boot light but it's not got any wires at all, I know it's a daft question but can someone let me know how to wire it up so I can attach wires to the 2 metal pins, thanks




Sent from my iPhone using Tapatalk
Reply
#22
Not a daft question mate, I wouldn't have a clue lol! Pop out the boot light in car and have a look, see if it's a quick and easy fix.


Sent from my iPhone using Tapatalk

Reply
#23
I soldered and covered with heat shrink.


Sent from my iPhone using Tapatalk
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#24
I was thinking of using one of the pins from the connectors I've bought and modifying it to clamp onto the pins and the wire at either end


Sent from my iPhone using Tapatalk

I've done this, reckon it'll hold?





Sent from my iPhone using Tapatalk
Reply
#25
Should be fine mate just put some heat shrink around them


Sent from my iPhone using Tapatalk
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#26
Yeah I did that as soon as I posted the pics aha


Sent from my iPhone using Tapatalk




Sent from my iPhone using Tapatalk
Reply
#27
looks very good you will have no problems with that
Reply
#28
All done




Sent from my iPhone using Tapatalk
Reply
#29
Nice dude! Glad it worked out for you

Sent from my A0001 using Tapatalk

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#30
well done looks very good
Reply
#31
Looking good


Sent from my iPhone using Tapatalk
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#32
just doing this today to the sig but run out off daylight ha ha
Reply
#33
Haha hate these winter hours


Sent from my iPhone using Tapatalk
Reply
#34
(31:st-Oct-2015, 18:58:16)tucpal Wrote: just doing this today to the sig but run out off daylight ha ha

use a tourch
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#35
ha ha i just did all done
not the best pics but never the best pics at night
but they really do look better with 2
the insignia had a hole already there and the old astra j light fitted like a glove



Reply
#36
Very nice mate, something else I need to get done!


Sent from my iPhone using Tapatalk

Reply
#37
I originally wanted an insignia but my girlfriend told me I was too young for it and that I'd look old before my time if I had one haha


Sent from my iPhone using Tapatalk
Reply
#38
Ha ha
Reply
#39
It's practically a big J anyway


Sent from my iPhone using Tapatalk
Reply
#40
They share many parts really but having had a j for over three years it was Time to move on to something different I've already started a few things on it already I will put a few updates up this week about it I am sure we will see my old j back on here at some point ha ha
Reply
#41
Can't believe you sold it with the headlights you modified, I'd have taken them off of your hands :(


Sent from my iPhone using Tapatalk
Reply
#42
(1:st-Nov-2015, 12:05:50)Nemo Wrote: Can't believe you sold it with the headlights you modified, I'd have taken them off of your hands :(


Sent from my iPhone using Tapatalk

The headlights are now on Lewis's car I had to help fit them, not bad they are really doing the rounds as they came off my car when I got the AFL all working.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#43
Haha I'd really like to convert my own but i don't trust myself to dismantle the units and I don't want to fork out £300 for some new ones


Sent from my iPhone using Tapatalk
Reply
#44
Whenever I have the cash is try getting a set from breakers as cheap as possible and convert them..


Sent from my iPhone using Tapatalk

Reply
#45
i sold and took off as much as i could yer lewis owns the headlights now
Reply
#46
Could someone recommend the best bulb for the boot as i am adding an extra light but wasnt sure which white leds would be the best for this. Thanks
Reply
#47
Any led ones off eBay are fine but they aint bright really hence why you're better off going down the route in this tutorial.

Any reason you want to add an extra one with a standard bulb and not the led blocks mentioned in my tutorial?

Sent from my XT1092 using Tapatalk

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply
#48
is a citroen boot light any good for this
Reply
#49
should be as long as it has positive and negative and you can connect it up
Reply
#50
Any reason you wouldn't just wanna use the Reg plate bulb strips that I've used @mrtc?

Sent from my EVA-L09 using Tapatalk

Astra Energy 63 Plate 1.7 CDTI (150BHP)

Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Super Bright Boot Lights sheppy1 26 22,124 12:th-Nov-2020, 17:54:59
Last Post: Arkanggel10
  how too AMBIENT LIGHT AROUND THE GEAR GATOR tucpal 165 111,374 15:th-Oct-2020, 06:59:05
Last Post: Rusty2009
  How-to led reverse light tucpal 23 28,138 18:th-Feb-2020, 08:26:05
Last Post: Rusty2009
  security light tucpal 34 30,164 2:nd-Jan-2019, 18:50:28
Last Post: Collster
  How To remove the front courtesy light Rusty2009 6 13,127 16:th-Feb-2015, 01:35:07
Last Post: tucpal

Who read this thread?
1 User(s) read this thread:
ciore72 (10:th-Jan-2025, 17:35:33)

Forum Jump:


Users browsing this thread: 1 Guest(s)