Hello,
I made t20 led using 12v g4 led. The g4 led is used for home lighting. G4 led is 12v and 2 watts. I will try to explain how I do it.
![[Image: 77ZO9Y.jpg]](https://i.hizliresim.com/77ZO9Y.jpg)
I soldered 2 pieces of copper wire to + side. I soldered 1 pieces of copper wire to eksi side.
![[Image: l31LkE.jpg]](https://i.hizliresim.com/l31LkE.jpg)
Then I used the piece of the old t20 LEDs. I connected the positive cables in parallel and there was no error in the car.
![[Image: VPYAlP.jpg]](https://i.hizliresim.com/VPYAlP.jpg)
Its color is daylight. I used the experiment tube to make it orange. I cut the test tube and painted it with orange glass paint.
I made t20 led using 12v g4 led. The g4 led is used for home lighting. G4 led is 12v and 2 watts. I will try to explain how I do it.
![[Image: 77ZO9Y.jpg]](https://i.hizliresim.com/77ZO9Y.jpg)
I soldered 2 pieces of copper wire to + side. I soldered 1 pieces of copper wire to eksi side.
![[Image: l31LkE.jpg]](https://i.hizliresim.com/l31LkE.jpg)
Then I used the piece of the old t20 LEDs. I connected the positive cables in parallel and there was no error in the car.
![[Image: VPYAlP.jpg]](https://i.hizliresim.com/VPYAlP.jpg)
Its color is daylight. I used the experiment tube to make it orange. I cut the test tube and painted it with orange glass paint.