Retro fit sport and tour buttons

[syscleaner]

Hello all,

I found a guy over here that can install sport and tour button with limited functions. (Steering wheel and accelerator sensitivity, Auto gearbox shift down etc) 

However, upon my checkings I do not have the looms that are necessary. While I was waiting for my buttons to arrive I would like complete the loom on hand so if possible can someone (probably rusty Hi rusty  ) supply me with the pinout for the BCM and the buttons. 

PS I tried gme-infotech portal but its name changed as servicebox even I made necessary registrations I coudn't open the old system, also I never able to find cable data over system :S 

Anyways thanks in advance...

---

Ow I found BCM side over the from
https://www.vxoc.org.uk/forum/attachment.php?aid=1046

If I just get the sport and tour button parts I will be very appricated...

[Rusty2009]

Here you are.

BCM are attached rather than images.

[syscleaner]

This is perfecet Rusty thank you very much

[leeso]

Did you manage to get this working, would it work on a 2.0 5 Door Elite with normal suspension?

[SbVampire]

Here you are.

BCM are attached rather than images.

Hi Rusty ! 

I mounted a tesla navigation and had to relocate some buttons like Sport , Tour, ECO and Lane departure warning . 

So I ordered some custom buttons for this. I wired them like this (for sport and tour): Pin 1 and 3 momentary button for function activation, Pin 4 and 6 for the function activation indicator lamp . My question is : How should the wire for pin 2 be wired? The one for the backlight dimming control. Also is it correct the way I wired the rest of the wires ?
I would be really grateful for some help.  

Cheers!