VXOC Astra-J/GTC

Hello all,

I found a guy over here that can install sport and tour button with limited functions. (Steering wheel and accelerator sensitivity, Auto gearbox shift down etc) 

However, upon my checkings I do not have the looms that are necessary. While I was waiting for my buttons to arrive I would like complete the loom on hand so if possible can someone (probably rusty Hi rusty  ) supply me with the pinout for the BCM and the buttons. 

PS I tried gme-infotech portal but its name changed as servicebox even I made necessary registrations I coudn't open the old system, also I never able to find cable data over system :S 

Anyways thanks in advance...

---

Ow I found BCM side over the from
https://www.vxoc.org.uk/forum/attachment.php?aid=1046

If I just get the sport and tour button parts I will be very appricated...

Here you are.

BCM are attached rather than images.

This is perfecet Rusty thank you very much

Did you manage to get this working, would it work on a 2.0 5 Door Elite with normal suspension?

(17:th-Aug-2020, 11:06:10)Rusty2009 Wrote: [ -> ]Here you are.

BCM are attached rather than images.

Hi Rusty ! 

I mounted a tesla navigation and had to relocate some buttons like Sport , Tour, ECO and Lane departure warning . 

So I ordered some custom buttons for this. I wired them like this (for sport and tour): Pin 1 and 3 momentary button for function activation, Pin 4 and 6 for the function activation indicator lamp . My question is : How should the wire for pin 2 be wired? The one for the backlight dimming control. Also is it correct the way I wired the rest of the wires ?
I would be really grateful for some help.  

Cheers!