Switch to desktop version  
Retro fit sport and tour buttons - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Retrofit Research (https://vxoc.org.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Retro fit sport and tour buttons (/showthread.php?tid=4733)

Retro fit sport and tour buttons - syscleaner - 15:th-Aug-2020

Hello all,

I found a guy over here that can install sport and tour button with limited functions. (Steering wheel and accelerator sensitivity, Auto gearbox shift down etc) 

However, upon my checkings I do not have the looms that are necessary. While I was waiting for my buttons to arrive I would like complete the loom on hand so if possible can someone (probably rusty Hi rusty  ) supply me with the pinout for the BCM and the buttons. 

PS I tried gme-infotech portal but its name changed as servicebox even I made necessary registrations I coudn't open the old system, also I never able to find cable data over system :S 

Anyways thanks in advance...
Ow I found BCM side over the from
https://www.vxoc.org.uk/forum/attachment.php?aid=1046

If I just get the sport and tour button parts I will be very appricated...

RE: Retro fit sport and tour buttons - Rusty2009 - 17:th-Aug-2020

Here you are.

BCM are attached rather than images.







RE: Retro fit sport and tour buttons - syscleaner - 18:th-Aug-2020

This is perfecet Rusty thank you very much

RE: Retro fit sport and tour buttons - leeso - 5:th-May-2021

Did you manage to get this working, would it work on a 2.0 5 Door Elite with normal suspension?

RE: Retro fit sport and tour buttons - SbVampire - 9:th-Sep-2021

(17:th-Aug-2020, 11:06:10)Rusty2009 Wrote: Here you are.

BCM are attached rather than images.

Hi Rusty ! 

I mounted a tesla navigation and had to relocate some buttons like Sport , Tour, ECO and Lane departure warning . 

So I ordered some custom buttons for this. I wired them like this (for sport and tour): Pin 1 and 3 momentary button for function activation, Pin 4 and 6 for the function activation indicator lamp . My question is : How should the wire for pin 2 be wired? The one for the backlight dimming control. Also is it correct the way I wired the rest of the wires ?
I would be really grateful for some help.  

Cheers!