24:th-Oct-2015, 20:37:32
Will insignia wheels fit a 5 door astra J? Or are they different PCD?
These to be precise -
These to be precise -
Connect with your social network account |
Tags |
fitment wheel |
wheel fitment
|
24:th-Oct-2015, 20:37:32
Will insignia wheels fit a 5 door astra J? Or are they different PCD?
These to be precise -
24:th-Oct-2015, 20:55:51
J PCD is 5x105 or 5x110 not sure what the Sig is
Sent from my iPhone using Tapatalk Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
24:th-Oct-2015, 21:38:48
Hmm would have to use adapters then, just depends on the offset and if they would stick out too far with adapter/spacers.
Just really like the style of the wheel, and have never seen a set on an astra, they not even that common on an insignia tbf
24:th-Oct-2015, 21:58:19
Plenty of 110 to 120 spacers about m8 for the £130 mark, just dont know if the wheel will protrude too much with a spacer
24:th-Oct-2015, 22:01:53
i few have had 25mm spacers but you may have to get the original studs changed also
to correct length i would rather pay someone to sort that out
24:th-Oct-2015, 22:06:32
Spacers but extra load on the drive shafts I wouldn't use them myself.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
24:th-Oct-2015, 22:11:56
Would it put extra load on the driveshaft though? Surely with a hubcentric spacer, and additional load would be taken by hubs, shocks, bottom arms etc??
24:th-Oct-2015, 22:49:31
So I was told by my mechanic.
Sent from my iPhone using Tapatalk Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
24:th-Oct-2015, 22:54:01
it can if you over do it
it has been a hot topic over the net lovers and haters have a good read through this https://www.google.co.uk/url?sa=t&rct=j&...qDARUJd8TA
Hmm may have to rethink then, Ive used H&R hubcentrics in past, for around 4 years and had no probs, but they werent adapters, just spacers.
i would be looking for the smallest spacer possible, as I just want to adapt the stud pattern, not space out the wheels. I wouldnt use any cheap demontweeks/halfrauds style spacers ever, id only ever use hubcentrics. Alot of people use the 110 to 120 adapter to fit landrover wheels to astras for the euro look, people fit porsche to audi etc, so it is more than do-able, but as you say I wouldnt want to cause premature wear etc
24:th-Oct-2015, 23:29:59
sure its possible H@R would be your best bet
but as i said you may need to make the studs on the hub smaller or larger with a smaller spacer best get advice from a pro mate then you know it's correct
24:th-Oct-2015, 23:34:45
Thanks for the help guys, just loved that wheel from first time I saw it, looks great when moving too
|
« Next Oldest | Next Newest »
|