3:rd-Oct-2020, 07:17:47
(2:nd-Oct-2020, 21:41:53)M222RJF Wrote:(2:nd-Oct-2020, 21:14:58)Rocky33 Wrote: i was about to order opcom today but came across SCANMYOPELCAN app and thought to give it a try and it worked ,it found the fault code as P0672 Cylinder 2 Glow plug control circuit .
Atleast now i know before heading to garage ,Wonder if the glow plugs are expensive as my one must be with sensor as i have start stop system.
As i said above, it is stored on the BCM. My glow plug 2 has gone also stop start. 82 from lookers main dealer or can get them 20-25 second hand mate.
@M222RJF It is not stored on the BCM.
Glow plug is an Engine fault and will be stored in the ECU....
@Rocky33 Look on autovaux the sensor plug was £86 on there.
I would advise strongly against using a used glow plug you don't know the condition of the item or how long it will last bite the bullet buy new if it fails within the year you have a warranty to claim on.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.