11:th-Jan-2019, 12:23:07
Hi, there are no fault codes, there were but have now gone as has the service vehicle soon message.
I did not write the old codes down but they related to glow plug 1 no circuit or something very similar, had three codes for plug 1,2,3.
I have a diagnostic reader on my laptop with an ELM reader that I used to get the first codes and had it fixed. I did try buying 3 different Opcom units but none would work with my car.
I noticed this morning that if I turn the key on wait for the glow plug light to go out and do this 3 times and then a few pumps on the accelerator pedal as turning over it started after a few turns over, with out the pedal pumps it will just turn and turn for a little while then give up then try again it will go but is chugging for the first 20/30 secs.
Not sure if any of this helps.
I did not write the old codes down but they related to glow plug 1 no circuit or something very similar, had three codes for plug 1,2,3.
I have a diagnostic reader on my laptop with an ELM reader that I used to get the first codes and had it fixed. I did try buying 3 different Opcom units but none would work with my car.
I noticed this morning that if I turn the key on wait for the glow plug light to go out and do this 3 times and then a few pumps on the accelerator pedal as turning over it started after a few turns over, with out the pedal pumps it will just turn and turn for a little while then give up then try again it will go but is chugging for the first 20/30 secs.
Not sure if any of this helps.