![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
24:th-Sep-2018, 17:26:26
(24:th-Sep-2018, 14:36:12)letsgetrdy Wrote: Hi guys, replaced my seats today in my 11 plate, with seats from 14 plate, drivers is heated etc with electric lumbar, passengers just heated. Passenger one fitted fine but my drivers seat connector is totally different, can anyone point me in the right direction? Will I have to entirely unpin the connector then either use old connector housing or just spice them in one by one?
Here's a photo of the drivers side connector. Passengers was same as old seats and no Probs!
https://www.dropbox.com/s/lwjqz9kebq5kuv...3.jpg?dl=0
De-pin and use old connector is your quickest option.
![[Image: Rusty-2_zpsuzrvgsp6.GIF]](https://www.vxoc.org.uk/Images/rusty/post%20images/Rusty-2_zpsuzrvgsp6.GIF)
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.