2:nd-Feb-2018, 15:17:31
Got a little problem,
fitted the indicator stalk with the extra buttons on it today (menu, set/clr, up and down, to operate the driver display)
there's only 5 wires in my plug to the indicator stalk... assuming it's not multiplex, that'll be 'indicator left, right, high beam flash and high beam on.. and power.??
Do i need to add another 4 wires for the other buttons? and if so, which pins and where do i run them to (ipc or bcm)
fitted the indicator stalk with the extra buttons on it today (menu, set/clr, up and down, to operate the driver display)
there's only 5 wires in my plug to the indicator stalk... assuming it's not multiplex, that'll be 'indicator left, right, high beam flash and high beam on.. and power.??
Do i need to add another 4 wires for the other buttons? and if so, which pins and where do i run them to (ipc or bcm)