8:th-Jan-2018, 16:06:30
Hi mate due to not have having the exact engine as yours I'll not be able to give you exact detail but for doing the pipe yeah I would take the bumper off for more access as well as taking the under tray off, you will need to disconnect the pipe from the throttle body which is the bit I have circled in the photo and remove it from the intercooler itself but be careful taking it off the intercooler as there will be viton rings there on the intercooler, basically a o ring and the last thing you want as dropping that into the intercooler as it's part of a radiator pack which could mean having to remove the radiator and a.c if you have it if it falls inside to get it out, when disconnecting the pipe just make sure nothing else is clipped etc to it and you will be ok. It will take a bit of time if your doing it on the ground but will be worth it saving you garage fees.
Also here is a thread on removing the bumper if you haven't done it before.
https://www.vxoc.org.uk/forum/Thread-How...r-Facelift
Sent from my SM-N950F using Tapatalk
Also here is a thread on removing the bumper if you haven't done it before.
https://www.vxoc.org.uk/forum/Thread-How...r-Facelift
Sent from my SM-N950F using Tapatalk