20:th-Nov-2017, 11:46:32
(5:th-Nov-2017, 12:53:48)AstraRick Wrote:(17:th-Jan-2017, 22:07:38)DNT Wrote:(14:th-Jan-2017, 00:14:07)Rusty2009 Wrote: Wiring changes has to be made.
The cd400 is wired totally different to the rest you need to make your wiring match a cd400.
Sent from my iPhone using Tapatalk
So is changing wires and make them match a CD400 a difficult task to do? Relocating 3 or 4 cables in the factory iso connector wouldn't be a big deal but if it is needed more than this then it would be nearly impossible to make it. Maybe Amir Khezri could enlighten us about the alterations he did
@Rusty2009
Hello I'am a newbie from The Netherlands. I seriously need help. My car is an Astra J GTC 2012 with Navi 900. After colour scheme update the unit crashed. So I replaced it with an Android 5.1 head init. I can use my Navi 900 control panel in combination with the head unit (the push buttons are not correct, when I push PHONE the NAVI app starts up). On Ebay I bought an used CD 400 panel.
I did the wiring as showed on Youtube (OPC Club Franken) :
https://www.youtube.com/watch?v=GvSAB8IKEXw
Unfortunately for me it did not work, the CD 400 did not light up.
Is it possible to re-wire?
Pic 2 : Connector from Navi900 display (pink wire cutted in middle position)
Pic 3 : Connecter from head unit
Pic 4 : Connector from Navi900 (pos 2 connect to pink wire (pic 2)
Pic 6 : CD400 panel connect
Pic 7 : Navi900 panel connect
Problem solved , big thanks to Rusty2009