Fitting VXR seats

[cornishtaz]

Fitting us really easy it usually takes me 20mins. Do you already have 1/2 leather in your GTC? If you do then there's no need to swap the rear door cards as there the same.

Front seats have a T50 bolt at the rear if each runner, 1 electrical connector under the seat. Then slide it back so the hooks at the front slide out there slots and lift seats out, be careful as there heavy and awkward.

The rear bench needs a good tug upwards on the front edge to unclip the 2 locating lugs then ease it out from the rear edge. The seat back is the most awkward once the rear bench is out you need to remove the centre bracket/seat belt point think its 3 T50 or T45 bolts. Fold the seat back down then look at the 2 ends and you'll see the pivot point these have a spring loaded locator that need sliding towards the outside if the car while lifting the seat back.

If you want anymore help or someone to do it I'm in Swindon

Do you need the centre console? If not I'd be interested in the parking switch and gear surround light.

Sent from my SM-G930F using Tapatalk