My Insignia Elite, 2.0 CDTI. tucpal.

[tucpal]

thanks chaps

sheepy the tail pipe was no big issue for me as the pipe only has a very small bend in it
so i cut it off the end and used a straight tail pipe
i had a 2.75 to 2 inch reducer and a 2 inch to 2 inch join then pushed the tail pipe on over that
then i will get them spot welded to keep them on for good
it looks like this but it will stick out a bit more when i get it welded next friday and fixed correctly
just waiting for the ramp and welder to become free.