M072 (S160) Android Head Unit Install/Info

[Amir Khezri]

Oh I'm not sure then mate, why unit is that for?

Without pulling it out I can't remember properly mate, sorry.



Sent from my iPhone using Tapatalk

Its alright mate thanks for the try anyway. Did you had a CD400\CD300 model in your car before you replaced it whit the Android device or did you had a CD500 model radio in your car?

I had the cd400 mate. Everything was a simple swap over! Every plug had a place to go in new unit.

@marcus strange that, maybe because Rusty is updating forum??

Could be Tapatalk itself,  every other release is buggy. Back on point, h
ave we established which wiring harness that is.... The one with the purple wire?

Sent from my SM-G920F using Tapatalk

Hi Tonto, 

Well thats the whole point I don't know exact what the purple wire on my connector, but I know that that connector powers up my console. I think that there must be somewere another wiring diagram for powering up the console of CD400 unit comparing whit a CD500 unit. I believe that if console powers up that the functions work proper because there rest of the functions are working proper. My steering wheel functions, my other sensors like door sensor, park sensor, dimming the lights etc are working. 

I think by my self that my connector:
   

Need the black GRN wire (see the arrows). I believe (but not for sure) that the CD400 console didn't power up by the screen comparing whit the CD500 model. Unfortunately i can't find anywere a wiring diagram of a CD500 unit so that I can compare it whit mine, so by now im just guessing about the black wire. And to be honest didn't want to try something before otherwise I wont get any refund for the radio and have two more weeks to decide what to do whit it. In the meanwhile i've contacted Seicane also and they said that this model:
http://www.seicane.com/seicane-s127882-1...en-s127882
will be fitting in my car and will be complere compatibe whit my model radio. But it's the same model like I have bought:
http://www.aliexpress.com/item/Android-4...49594.html

Like I said there must be only other wiring diagram because the CANBUS that they use is like the same what they use for a CD400 or a CD300 model. Like the one what you have. So I hope I can make it work whit my model and don't wanna spend $$ at the dealer because they have always special prices for this kind of requests hehehe :-). 


Cheers