Various switch LED conversion

[cornishtaz]

How for the following switches

EPB switch

Tools required
7mm socket
T20 driver
Rachet
Small screwdriver
Qty 1 PLCC-2

Using the info in Tucpal thread remove the Centre console and EPB switch

Once switch is removed

Split switch using these tabs


The LED to be changed is in blue. To make it easier I removed the lefthand switch(3 connections underneath)



Roof console

Tools required
T20 driver
Small screwdriver
Qty 1  PLCC-2 sideled

Sorry no pics
Remove the bezel around the interior light
Remove the 2 exposed screws and remove the roof console
Release the electrical connector
Remove the interior light from the roof console

Once light is removed remove the clear tubing


Then bend these copper tabs (carefully)


There are 2 small tabs holding the PCB in


PCB LED for the switches circled red. I also added ambient lighting(early models may already have this my 13 plate didn't) You need to add a 2nd PLCC-2 sideled in the yellow circle and qty 3 619R smd resistors circled in blue

This is where the 2mm hole needs adding

hole added(yellow square)


Completed