![](data:image/svg+xml;charset=utf-8,<svg height="16px" width="16px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="15px" width="15px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
![](data:image/svg+xml;charset=utf-8,<svg height="55px" width="55px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
14:th-Jun-2015, 20:59:41
(14:th-Jun-2015, 20:09:13)sheppy1 Wrote: Hmmmm yeah defo looks good hidden like that but isn't bothering me in the slightest having it visible...it only drops a few CM below the rear view mirror so isn't much more noticeable than the rear view mirror itself...plus I can easily see if the thing is still recording as it has a flashing red iconFrom behind the mirror to the piller is the easy bit as the wire will just push in with your fingers. I was a bit dubious about the pushing it down the piller because of the air bags but i read a write up on here and the long and short is, if you give the lower part of the piller cover a firm pull it will come off, a gentle thump is all you need to put it back. The biggest problem i had was getting the glove box out as the trim between the door card and the glovebox has a stupid locating lug on it.
Anyone got any hints, tips or a tutorial on how to get a wire from wherever you guys have put it, up into the pillars and then to the cameras?
![](data:image/svg+xml;charset=utf-8,<svg height="21px" width="21px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
Sent from my LG-D855 using Tapatalk
![](data:image/svg+xml;charset=utf-8,<svg height="1px" width="1px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)