11:th-Jun-2015, 12:47:32
(11:th-Jun-2015, 12:40:01)DC_ELiTE Wrote: @Rusty2009
Hey Rusty
FINALLY got around to wiring this in today but have come a little stuck.
Have pushed the power cable through the hole, great tip on the knitting needle that was perfect for the job!
I proceeded to remove the negative as you said, no problem.
Got the positive and I can't actually undo the bolt past a certain point, it just kind of stops turning. Its enough to get the hoop off of the terminal but it means I can't install the hoop from the power lead to the sub.
Is it just a case of brute force?
Mine was the same mate, I got it off and on once with force just kept going back and forth but when I needed it off again it wouldn't come off just had to cut the bolt in half I went to Halfords and got this for £1.80 http://www.halfords.com/motoring-travel/...-m6-x-25mm and just replaced the whole nut and bolt.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.