This forum uses cookies

**Jj0063** · 6:th-Feb-2016, 19:02:44

Just finished wiring in my LED puddle/wing mirror lights.

Ran two core flex from the interior light down the A pillar, behind glove box, through door loom, took the mirror off & ran the wire along side the electric mirror loom.

Only thing is I ordered a black strip but they sent white so I'm gonna order more black and swap it over.

Works great, sorry for the terrible video

http://youtu.be/8bhso25KDs8

Il try get some pics tomorrow when I do the drivers side.

Cheers

**tucpal** · 6:th-Feb-2016, 19:32:28

Well done

**Jj0063** · 6:th-Feb-2016, 22:11:37

Might change the led strip for something drilled & screwed in but at least I've got the wiring there now so only 2 bolts holding the mirror on to change it

**tucpal** · 6:th-Feb-2016, 22:18:25

trial and testing is the best way to find the correct way

**Nemo** · 6:th-Feb-2016, 22:38:35

So is that literally stuck on?

**Jj0063** · 6:th-Feb-2016, 22:45:52

(6:th-Feb-2016, 22:38:35)Nemo Wrote: So is that literally stuck on?

The current LED strip is held on with 3m tape then wired into the interior light yep.

**Nemo** · 6:th-Feb-2016, 22:47:55

Any plans to cut a hole and fasten them in?

**Jj0063** · 6:th-Feb-2016, 23:01:49

I'm going to try a few different LEDS to see which combination of light and fitting is best. I'm happy with the stick on ones as you can't see them unless you look up from underneath but something flush/fitted more OEM is more my preference. The concept is great though!

**Nemo** · 7:th-Feb-2016, 00:35:54

Yeah I'd like a proper fitting if I were to do it, I like the concept though, good work

Tonto · 7:th-Feb-2016, 08:59:56

Very well done!

Sent from my iPhone using Tapatalk

**Jj0063** · 7:th-Feb-2016, 13:33:44

Finished it today

Basically follow the how to on puddle lights thanks to Rusty but then run the wire from the door loom up and out of the wing mirror part of the top of the door.

Drill a small hole for the wires to go through in the bottom of the mirror, pop the cap off and feed it though. You'll need to feed it through the same place the loom goes which is the hardest part but can be done. I then taped this to the mirror loom to keep it OEM and tidy.

You can see the hole at this angle..

To keep the water out I have used something called trim shield which I use at work as a windscreen fitter to stop scuttle panels rattling etc. It's like a black industrial blu tac which seals the hole.

Finished.. The eager eyed ones will noticed I messed up by cutting my black strip too short meaning only 3 lights worked so I have used white for now.

Finished...

I'm really happy with it as you literally can't see the strips unless you look up from underneath.

Cheers

Tonto · 7:th-Feb-2016, 13:39:21

Well done mate!

Sent from my iPhone using Tapatalk

Login
Username/Email:
Password:	Lost Password?
	Remember me

Or login with your social network account

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	auto fold mirror modules	Qaranc	4	2,765	11:th-Jan-2023, 01:49:50 Last Post: Qaranc
	New AutoDipDown module for passenger mirror	A20DTH	2	2,739	21:st-Oct-2022, 09:33:44 Last Post: rlievens
	perm 12v near mirror	dammfust	1	1,993	6:th-Sep-2021, 11:31:25 Last Post: Astragtc1282
	Mirror	Flick19191	7	8,260	11:th-Nov-2019, 11:58:51 Last Post: Flick19191
	Happyblue module ambient lights	Kdun	1	3,284	9:th-Mar-2019, 10:22:32 Last Post: Rusty2009
	New member - Led lights	HarryH	7	4,926	4:th-Jan-2019, 13:55:53 Last Post: Big Dave2
	Astra J GTC Daytime running lights	Wanna_be_dj	5	7,313	1:st-Jun-2018, 09:49:33 Last Post: Wanna_be_dj
	Ambience lights gtc	Wullie1967	0	2,864	10:th-Mar-2018, 10:24:05 Last Post: Wullie1967
	Astra GTC ambience lights	Wullie1967	2	3,895	9:th-Mar-2018, 19:14:13 Last Post: Wullie1967
	Unlocking with lights on	Mspencer	10	8,165	21:st-Jan-2018, 20:32:19 Last Post: Hummelshøj