This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
release flywheel bearing or

Flywheel or release bearing
#1
Just bought a 1.7 cdti with 125000 and noticed that when on idle it’s noisy and car vibrates but when i press clutch it stops also gear lever is jumping when in 1,3,5,6 gear but 2,4 are fine also wine in all gears so rebuild/new gearbox,im going to change myself just don’t know if to buy a new clutch/flywheel as the clutch feels perfect just under half pulling away [Image: cdbd1b21a8aa2441f9c4062cad2c91fc.jpg]
[Image: 013fd44ecf1321b556b88b0e258a475d.jpg]
Not bad for £1250 with full history and long mot
Reply
#2
If box out always recommend new flywheel and clutch especially if duel mass.
NAVI950 , DAB+ & Rear Camera , quick heat, auto lights and rain sensor retrofit Smile
Reply
#3
Will a 1.9 clutch and flywheel fit as ive got a brand new luk one in the shed also is there any difference in 1.7 and 1.9 m32 gearbox coz ive got one in the shed too off my zaf that i could rebuild myself
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Switch to mobile version