Switch to desktop version  
Flywheel or release bearing - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC Technical (https://vxoc.org.uk/forum/forumdisplay.php?fid=20)
+--- Thread: Flywheel or release bearing (/showthread.php?tid=5005)



Flywheel or release bearing - Dvaltd - 11:th-Aug-2021

Just bought a 1.7 cdti with 125000 and noticed that when on idle it’s noisy and car vibrates but when i press clutch it stops also gear lever is jumping when in 1,3,5,6 gear but 2,4 are fine also wine in all gears so rebuild/new gearbox,im going to change myself just don’t know if to buy a new clutch/flywheel as the clutch feels perfect just under half pulling away

Not bad for £1250 with full history and long mot


RE: Flywheel or release bearing - Jpbroad1970 - 11:th-Aug-2021

If box out always recommend new flywheel and clutch especially if duel mass.


Flywheel or release bearing - Dvaltd - 12:th-Aug-2021

Will a 1.9 clutch and flywheel fit as ive got a brand new luk one in the shed also is there any difference in 1.7 and 1.9 m32 gearbox coz ive got one in the shed too off my zaf that i could rebuild myself